 |
 |
 |
 |
 |
 |
  |
What size gear motor?
The VC2000 should be used in high wind areas, with glass vents or elbow arms.
|
VC
100A MOTOR
|
VC
2000 MOTOR
|
3
RPM VC 2000 MOTOR
|
|
1/20 Horsepower-T.E.N.V. |
1/5 Horsepower - T.E.F.C |
1/5 Horsepower - T.E.F.C |
|
115 Volt-60 Hz.-.68 amp |
115 Volt-60 Hz. - 2.5 amp |
115 Volt-60 Hz. - 2.5 amp |
|
Ball bearing motor |
Ball bearing motor |
Ball bearing motor |
|
1600 RPM |
1600 RPM |
1600 RPM |
|
Thermal overload protection-automatic reset |
Thermal overload protection-automatic reset |
Thermal overload protection-automatic reset |
|
Quick reversing |
Quick reversing |
Quick reversing |
|
Continuous Duty |
Continuous Duty |
Continuous Duty |
|
Copper windings-insulation class |
||
|
VC
100A GEAR REDUCER
|
VC
2000 GEAR REDUCER
|
VC
2000 GEAR REDUCER
|
|
Adjustable torque limit switch assembly |
Adjustable torque limit switch assembly |
Adjustable torque limit switch assembly |
|
Output torque 500 in. lb. / 56 Nm |
Output torque 1500 in. lb. / 169 Nm |
Output torque 1500 in. lb. / 169 Nm |
|
Total gear ratio 1900:1 final output .84 RPM |
Total gear ratio 1350:1 final output 1.2 RPM |
Total gear ratio 550:1 final output 3 RPM |
|
Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease |
Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease |
Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease |
|
Dual output shaft |
Dual output shaft |
Dual output shaft |
 |
 |
 |
 |
 |
 |
