M-1608

M-1608 Four Stage Electronic Vent Controller

This four-stage electronic control is pre-set for Wadsworth's Incremental vent control system. Three of the stages control the incremental vent. The fourth stage is free and can be used for another piece of equipment such as a heater or a full open (non incremental) vent.

Each stage can be independently programmed. A keypad provides easy programming and operation. An LCD display shows the current temperature, mode and output status.

The M-1608 four-stage controller comes with a solar-shielded remote sensor with 75' of shielded cable. It can be powered from 24, 120 and 240 VAC sources, has a set point range of -40º to + 220º Fahrenheit, and is housed in a NEMA 4 enclosure.