STEP Up

6 Stages

• 2 Stages of Heating
• 4 Stages of Cooling
• Easy to adjust the temperature between stages.
• 2 Incremental outputs modulate vents, side roll-up or curtains.
• Easy adjustment of temperatures between stages.

3 Setpoint Periods

• Day/Night/DIF set points
• Ramping controls the rate of change between periods
• Periods can be set based on clock time or sunrise and sunset.
• Tracks grow weeks

Modulating Output

• 0 - 10 volts or 4-20 milliamps Controls Heat Valves or Variable Speed Fans

Cycle Timer

Password protected

Manual Override

• Timed override buttons on the STEP Up control allow equipment to be forced on or off for a specific duration.
• Red LED lights indicate active stages
• Manual override toggle switches are on the contactor panel

Logs and Graphs Data

• Average, high and low temperature for each setpoint time period
• Average temperature in 15 minute increments
• Data is stored on the STEP Up for 7 days and can be viewed in logs or graphs
• STEPsaver software connects your STEP Up to a PC advanced data logging and graphing. Coming Soon!

Settings are stored in memory in the event of power failure.

Fahrenheit/Celsius selectable

Alarm notification with optional Alarm Manager

Help Button

• Provides additional information

Ability to return to factory settings

STEP Up Control Includes

• An aspirated temperature sensor and 100' of cable
• Optional RH sensor _ Connector cable to wire the STEP Up control to the contactor panel

STEP Up size Length = 9-1/2",Width = 3-3/4", Height = 6-1/4"